Wanted to share this since this was a long Project. Since Autodesk started changing Fusions functionality, from limiting active projects, to changing their terms of service. Since I need a CAD tool for my 3D Printable designs, I started migrating to a new cross platform CAD tool. That happened to be FreeCAD.
Learning FreeCAD wasn't easy, but was well worth my time. And after slowly pecking at it for 11 months, I was able to re-build every design I made (that I cared about).
I've made my 3D Printable designs available on my GitHub if you are interested: https://github.com/the16bitgamer/16BitVirtualStudiosDesigns
Selection in freecad sketches is really bad. Box select with dragging the mouse doesn't work, you can't mask elements (make only points or only curves selectable), selections are added to the current selection instead of replacing it even if you aren't holding shift, and if you miss and click on the backgeound accidentally it unselects everything. And selections aren't part of history so if you spend five minutes selecting a lot of specific elements and then misclick once, welp do it all over again, no undo for you.
There are a few tool buttons like "selected constraints related to the currently selected element" which are really helpful though.