We meet at the Olympia-Schwimmhalle Sauna - they feature a ice room, hourly sauna sessions and a nice inner recreation area with cold pools, etc.
For drinks, bring some cash - there is a small sauna bar where we can get a (non-)alc drink.
Sep 19 at 17:30 at Olympia-Schwimmhalle, Coubertinpl. 1, 80809 München, Germany
We meet at an exclusive spot close to the alps, south of Munich. Former location for the sauna masters, this place will provide for amazin sauna sessions. Be sure not to miss it!
Aug 10 (Saturday) at 14:00 at Kristall Therme trimini Kochel am See, Seeweg 2, 82431 Kochel am See, Germany
Join us for a relaxing evening of tech talk, sauna vibes, and refreshing lake swims at the Seebad Starnberg!
Date: July 18, 2024 Time: 17:30 Location: Seebad Starnberg, Starnberger See
Embrace the summer heat with fellow tech enthusiasts!
We're kicking off the evening with some casual networking and conversation. Enjoy the sauna, relax by the lake, and take a dip in the refreshing waters of Starnberger See. This is your chance to connect with other tech professionals, share ideas, and unwind in a beautiful setting.
Important Note: The Seebad Starnberg is operating with a summer tariff, so you can arrive early and enjoy the facilities all day. Only day tickets are available.
We look forward to seeing you there!
Alright fellow tech enthusiasts, mark your calendars for our next Munich Tech Sauna June meetup! We're venturing to the Monte Mare Schliersee Sauna, nestled close to the picturesque Schliersee, offering an exclusive sauna experience in a stunning setting.
We're straying a bit from Munich, but fear not, the journey to Schliersee and the Monte Mare Schliersee sauna remains conveniently reachable by train from Munich main station.
Join us on June 15 for a day of sauna bliss. Many of us will be starting our steamy sessions around 12:00 or possibly even earlier. If you're new to our community, give us a shout in the #meetups channel on Discord, and we'll make sure you're welcomed and guided by some friendly community members.
A heads-up: Monte Mare Schliersee sometimes requires a special reservation, so it's wise to double-check their website at https://www.monte-mare.de/schliersee/.
Prepare for sauna heaven! Monte Mare Schliersee boasts a variety of saunas and top-notch regular infusions. After indulging in the heat, cool off with a relaxing swim, lounge around, and perhaps enjoy a refreshing beer. It's shaping up to be the ultimate Munich Tech Sauna gathering!
For our May meetup, Munich Tech Sauna will meet at the world's largest sauna and SPA area: Therme Erding. As May 9 is a public holiday in Bavaria, we will meet already at 2PM at the entrance of the sauna area.
While this is an absolute highlight, it is quite essential to meet at the entrance or communicate BEFORE to arrange a meetup within the sauna area. With 26+ saunas it's easy to get lost or never find us at all :-)
Needless to say that Therme Erding will provide an amazing sauna experience with world class infusions, a bar in the pool for a fresh beer and many more great experiences.
Full address: May 9 at 14:00 at Therme Erding, Thermenallee 1-5, 85435 Erding, Germany - easy to reach by public transport via S2 and the stop Altenerding (not Erding!) and a 10 minute walk.
Our April meetup takes us to the central Nordbad in Munich. It's an SWM run sauna, so don't expect too much when it comes to the sauna infusions, but they feature several sauna's and if we are lucky there will be infusions at 19.00 / 20.00 / 21.00 as well as a salt peeling in the steam bath at 19.30. It's definitely a central place and great to chat.
Full address Apr 18 at 17:30 at Nordbad, Schleißheimer Str. 142, 80797 München, Germany
Best reachable via Tram 12, 27, MetroBus 53, 59 (Nordbad and Hohenzollernplatz) StadtBus 154 (Nordbad) U2 (Hohenzollernplatz)
please note It's recommended to get a reservation for this special event... it guarantees entrance to the sauna. https://shop.kristall-trimini.de/category/21 Choose March 7 which is the day we visit from about 12/1300 - we will meet inside, so make sure you connected to not sauna alone!
Visit the Sauna Masters / Sauna competition at the Kristall Therme Trimini Kochel am See - many will likely join, some by car, some by train (and a nice walk) or by bicycle... So let us know in #meetups if you plan to come and then let's share travel plans. This sauna event will be quite special, expect the best of the best battling for the best Saunameister.
If you want, you can join our group bike ride in the morning from Puchheim-Bahnhof (S) to Ammersee (stop at Alte Villa) down to Kochel am See. This will be a tempo ride, good fitness required - 91 km over 4h roughly. Details here https://www.strava.com/clubs/techsauna
In any case, it's really recommended you join our Discord for the #meetups channel and realtime info on the day of this event.
For our official March meetup, we will meet at the Munich-local and well accessible Cosima Wellenbad. This place features a fresh and modern sauna area and some of our community will remember the great meetup we had there last year - we pretty much filled up the "Bio-Sauna" for great chats and the sauna infusions we experienced there were also quite good (for SWM).
According to their website, there will be two infusions at 20:00 and 21:00 - before we can try out the Bio-Sauna, steam bath or the 'Stollensauna' in the outside area... as well as have chats or visit the pool!
We can exit the sauna area and get a drink/food at the restaurant, accessible from the swimming pool area.
Our second meetup of the year will take us to the well known and Munich-local Michaelibad. We've been there before and enjoyed the chatty context - hope to cu soon!
Feb 15 | 1730 sharp at entrance area or later inside | Michaelibad
What's special? The spacious sauna on two floors is a visual delight – bathed in light and kept in warm pastel tones. On the ground floor, you can cool down in the large cold pool and a small outdoor garden between sauna sessions. Upstairs, two relaxation rooms and the outdoor terrace await you.
Saunas:
Cold enough? Join us for gadget-free tech talk at the Monte Mare Tegernsee on Dec 7. We meet 1730 at the entrance. Train from Donnersberger Brücke runs 1608 to final Stop Tegernsee. From there it's a short walk.
Check techsauna.dev for details and say hi on Discord. For this meetup it's advised to get an online reservation - check the Monte Mare Tegernsee Website.
The revxlp is using a shift register - that's the trick
SOLVED
all solved... I had 2 dead pins due not really following the tape socket explanation in the readme. and when I pulled out the xiao, the socket came half way out. I now did solder a new xiao and checked all pins, now all good... phew! thx again! it chose the 12u miryoku firmware and it works
Thx again - just printed the right side and was initially a bit worried about the snug fit, but after pushing it in a bit it simply fits perfectly!
let me confirm it was an issue with karabiner-elements... I totally forget, thx for the great comments @[email protected] and @[email protected] I now just realize that the Miryoku Colemak DHK is also not the default, but I'll just swithc that back to default and it will most likely work!
thx all!
Oh no many others, some a bit over 36 keys, like piantor and revxlp... But just using 36 typically.
Chocofi is awesome, too. Also built crowboard, and a self-wired skeletyl but right side unfortunately refused to work... Need more time to look into it.
I also ran a workflow (https://github.com/hansamann/miryoku_qmk/actions/runs/5660097404) now and did set the ColemakDHK specifically but it still does not quite give me the desired outcome.
q w t ; z
a p r b g
x c d s v
is the left side, which is not really colemak mod dhk... am I doing things dramatically wrong? or is something wrong with my build @[email protected] - I can hardly imagine, what could it be? also I think the default qmk built worked from a main colemak layout perspective, so the keymap was correkt with the default...
honestly I just like to build them... I am somehow locked in to 36 keys now though and try to get miryoku onto it...
This sounds excellent. Will give it a try in a few hours and let you know. Maybe we can ask manna to include it into the official Miryoku builds, too.
Yes this will be the step 1 - right now I am not able to flash the default, that's most likely because I am completely new to qmk... Will put extra time in soon.
this already lookes great - are the stls available?
also just fininshed the hardware build and now - for the first time - try to get qmk on it. I cloned the repo just as in build guide and also installed qmk as per qmk docs. but when I issue
make cheapino:default:flash
I get
QMK Firmware 0.15.18 make: *** No rule to make target 'cheapino:default:flash'. Stop.
Any idea? I am also on Mac...
All details are here: https://gitlab.com/lpgalaxy/revxlp