The original post: /r/homenetworking by /u/RexCommander501 on 2024-11-14 10:55:43.
I'm trying to build a home lab which components are my comercial router, a minipc with pfsense installed, and a couple of proxmox nodes. For now I'm just using one of the proxmox nodes.
The current config of the pfsense is a WAN (DHCP 192.168.1.x), a LAN (192.168.2.1) and I want to set up VLANs. Right now I'm trying with a VLAN (called VLAN10) 192.168.10.x, it's the only one I've tried to set up.
The firewall has 6 ports, from 0 to 5.
The pfsense config is:
- eth0 WAN (DHCP 192.168.1.x)
- eth1 LAN (192.168.2.1)
- eth2 VLAN10 192.168.10.x
- the parent device is eth2
The DHCP for VLAN10 is enabled.
When testing from my laptop I'm wired to the eth1 LAN. The laptop uses ubuntu and I'm changing the profile of the fixed IP.
I use my laptop to try to test all the connections, the problem is:
- When I try to ping the gateway of the VLAN, which is 192.168.10.1, from my proxmox node and my laptop, I can't reach
- When pinging between the proxmode node with an IP in the VLAN10 and the laptop, they can't reach each other
- From the proxmox node, if I ping google or 8.8.8.8, I do reach
- I can reach the VLAN gateway from the LAN from my laptop by configuring an IP for that LAN
- The proxmode node has only one RJ45 and it's connected to eth2
The proxmox node installation is fresh.
The pfsense firewall rules are the default.
Every component is new and has nothing installed from before. The pfsense version is 2.7.2. The proxmox version is 8.2.
The outbound NAT is in automatic mode.
I've just added one for VLAN10 from any to any, any protocol, any port, so *.
My goal is to have VLANs with internet access, where members of the same VLAN can ping each other.