48
submitted 1 year ago by [email protected] to c/[email protected]

Since rpis have been almost impossible to find, I've been looking around for alternatives for some local self hosted services like home assistant. A lot of boards seem to talk about GPU, GPIO pins, etc. But I really just want a single board, fanless (low power), decent CPU and RAM, ethernet.

Any recommendations?

top 50 comments
sorted by: hot top controversial new old
[-] [email protected] 10 points 1 year ago

This is slightly different, but in this rpi drought, I've set up proxmox on an old laptop and have several VMs/LXC/containers running on it. It fills that same role for me. I don't know exactly what the power cost comparison is, but it's gotta beat several rpis running simultaneously.

load more comments (2 replies)
[-] [email protected] 8 points 1 year ago

If you don't care about GPIO/serial lines, frankly buy a small NUC or a used Thinkcentre M93p. Used, you can find them for very cheap (£100 in my case), they are powerful enough for your needs, you can have an actual SSD storage, and you will avoid the odd issue with a software not working on ARM (less and less the case but still worth taking into account).

[-] [email protected] 2 points 1 year ago

I'll second the NUC--I use one as an HTPC and another as a headless server. Both run quiet, though there is a single small fan. Can't speak to power usage though.

[-] [email protected] 8 points 1 year ago

The Orange Pi 5 or Orange Pi 3 LTS are solid options, depending on your budget and how much horsepower you need.

[-] [email protected] 7 points 1 year ago
load more comments (1 replies)
[-] [email protected] 7 points 1 year ago

rock64 works pretty good for my use case as a 700 mbit router.

I've heard good things about the rockpi.

[-] [email protected] 4 points 1 year ago

I've got a Rock64 running OpenMediaVault with about 6-10 Docker containers. Works great and the power consumption is very minimal (~1A).

[-] [email protected] 2 points 1 year ago

That’s honestly pretty impressive. Well done.

[-] [email protected] 2 points 1 year ago

Thanks! It's installed on my sailboat, so the primary concern was efficiency from a power perspective. I wanted something I could run off 12V DC with the lowest possible power consumption that would still do the job.

I've got it running the Jellyfin/Radarr/Sonarr/Sabnzbd stack for media server purposes and PiHole for DNS. Even with DDclient and Wireguard containers running, the CPU utilization at idle averages around 25%.

[-] [email protected] 2 points 1 year ago

I can't get a usb webcam working on rock64. Just a heads up, the software support is very poor.

[-] [email protected] 6 points 1 year ago* (last edited 1 year ago)

The OrangePi 5 is one of the better options right now. Starts at $80 for a 4GB (RAM) model and goes all the way up to a 32GB model. CPU is roughly twice as good as an rpi 4, so if you want you can underclock it with no fan and get solid perf still

load more comments (3 replies)
[-] [email protected] 6 points 1 year ago

hp t530 or dell wyse 3040 or 5070 thin clients

[-] [email protected] 2 points 1 year ago

Do they have a fan that will get noisy after a while?

load more comments (1 replies)
[-] [email protected] 6 points 1 year ago

Old laptop or PC. I use an intel NUC for mine. Hosting 30 docker containers

[-] [email protected] 5 points 1 year ago* (last edited 1 year ago)

It’s not that difficult to get a Pi 4. I wrote a python script that scraped rpilocator’s rss feed every 5 minutes and would notify my phone when one was available in the US. It went off basically every day around 8:30am PST when Adafruit would drop 100+ Pi4s. I’ve picked up two in the past week (one for my Voron printer and another for a RetroPi cabinet). They did sell out fairly fast.. in about 10 minutes or so.

[-] [email protected] 34 points 1 year ago

Sorry I have to laugh at this. If you have to write a script for it even if the script is easy there’s no way I can consider it “not hard”. Not hard is just being able buy it like anything else.

I get what you’re saying though.

[-] [email protected] 5 points 1 year ago

I didn’t realize it would be so easy when I wrote the script. Knowing what I know now I’d just check adafruit every couple minutes starting a bit before 8:30am PST.

[-] [email protected] 5 points 1 year ago

The thing is that right now it's not worth it to buy a raspberry pi if you want to selfhost. It is 4 years old at this point but it cost 50% more than when it was released.

[-] [email protected] 2 points 1 year ago

Power wise you are absolutely correct. It is not the best performance value anymore. However, support for the Pi4 is much more robust when using them in specific projects designed to use them.

[-] [email protected] 5 points 1 year ago

Lots of cheep SFF/thin client machines on eBay.

[-] [email protected] 5 points 1 year ago

I bought a £20 thin client off of eBay to use as a simple file/Emby/pihole and Pivpn server running Ubuntu Server LTS for my home lab

Works great.

[-] [email protected] 4 points 1 year ago

Of the alternatives available, Libre Computer, Pine64 and Orange/Banana Pi all offer options that fit what you're looking for. You can generally find these on Amazon, eBay etc at a reasonable price.

[-] [email protected] 3 points 1 year ago

a cheap second hand laptop will be both faster and will have better wattage and what is basically an internal UPS

load more comments (4 replies)
[-] [email protected] 3 points 1 year ago

Thin Clients are the way to go! I got a Dell Wyse 5010 for cheap on ebay and replaced the internal 8 GB DOM memory with a 1TB SSD so it's basically a NAS now.

It does take a little DIY (video) but after that it runs more performant than RPis I've had in the past

[-] [email protected] 3 points 1 year ago

I don't need to run amd64 containers, so I like the Orange Pi 5 for raw ARM compute. For $149 you can get one with 16GB of RAM, an NVMe slot and 8 cores, all for < 15 watts.

If you're looking for something to be a disk server, the Odroid HC4 doesn't have as many cores or RAM but it does have 2 SATA slots in a toaster configuration.

[-] [email protected] 3 points 1 year ago
load more comments (1 replies)
[-] [email protected] 3 points 1 year ago

I gave up on using raspberry pi for running servers.

I ended up buying a $60 lenovo on ebay https://www.servethehome.com/lenovo-thinkcentre-m710q-tiny-guide-and-ce-review/2/ and then loaded it up with 32GB of ram. Now I run a proxmox hypervisor and around 20+ containers/VMs. Best decision I ever made. I just spin up servers willy nilly

If you don't need GPIO then run a hypervisor. Cheaper than SBCs and more useful.

[-] [email protected] 2 points 1 year ago

I use a pi for servers because of the assumption that it uses very little power to run (compared to say, an old unused laptop), is that not the case?

[-] [email protected] 4 points 1 year ago

Sure, but I just told you I'm running over 20 servers. Try running 20 raspberry pi's 😀

My resources are being shared for around 20W of power.

load more comments (1 replies)
[-] [email protected] 3 points 1 year ago

Aliexpress has some reasonably affordable fanless mini PCs. Not quite as low power but you can run a heap of containers on them since they are more powerful and x86 and some of them have multiple ethernet ports which can be useful for router purposes etc

[-] [email protected] 3 points 1 year ago* (last edited 1 year ago)

Thin client! They're significantly more powerful than a pi and you can grab them for nothing on eBay and you can use the nvme slots for storage

[-] [email protected] 2 points 1 year ago

After running Plex off a pi for like 6 years I think I'm finally about to graduate to a old PC in my closet

[-] [email protected] 2 points 1 year ago

Lewis from Everything Smart Home dropped a video a few weeks back, telling us about the Zimaboard - https://www.youtube.com/watch?v=jr7vo9NAWfo low power, fanless, single board etc.

[-] [email protected] 2 points 1 year ago* (last edited 1 year ago)

Get a mini pc/NUC with an intel j4125 or better and it will be a great little streaming powerhouse for jellyfin. Usually can grab one for < $150

[-] [email protected] 2 points 1 year ago* (last edited 1 year ago)

I have an Odroid c2 for that purpose. Low power but powerful enough to be used for home automation. The c2 is a bit older so there are probably newer versions. https://www.hardkernel.com/

[-] [email protected] 1 points 1 year ago* (last edited 1 year ago)

I have a C2 as well and I think the C4 is the newest of that series. I'm personally running an Odroid-N2+ for HA and it's awesome. Using HA + Add ons for a powerhouse of self hosting. The Home Assistant Blue is also based on the N2+ so support isnt an issue.

[-] [email protected] 2 points 1 year ago

Why are rpis hard to find? Are they not making as many anymore?

[-] [email protected] 3 points 1 year ago

Chip shortage, then scalpers happened.

[-] [email protected] 2 points 1 year ago

Still feeling the effects of the Chip Shortage of 2020-2022. They are still making a lot of pi's, but they have a huge backlog to work away. Large contracts get priority over distributors, unfortunately, so they are very hard to find.

https://rpilocator.com/ scrapes the web and displays available stock. Managed to get a rpi4 8GB a couple of weeks ago.

[-] [email protected] 1 points 1 year ago

I had no idea either they were getting scarce - is it just the really decent ones or the older ones too I wonder

[-] [email protected] 2 points 1 year ago

Pretty much all of them unfortunately. Although claims have been made that the situation should get better in the second half of 2023. It's about time tho, all pi models have been out of stock for at least 2 years at this point

[-] [email protected] 2 points 1 year ago

WHAT wow... And here I am using my little 4 to display a dakboard :/ I had a B+ and gave it away since it was so slow but that was 2017 hah

[-] [email protected] 2 points 1 year ago

I'm using one for my brewery as a controller. If that one dies I'm in trouble.

[-] [email protected] 1 points 1 year ago

Chip shortage really hit them hard... At some point I even had a Firefox extension that would send me a notification when they were available somewhere.

It's supposed to get better by the end of the year though.

load more comments (1 replies)
[-] [email protected] 1 points 1 year ago

I finally got around to using an old PINE64 SBC and that’s worked well for me. Have thought about getting an Orange Pi5 with the RK3588. I’ve seen them on Amazon and AliExpress and I’ve been mostly eyeballing 16GB variants but they’ve come in around $70 to $150ish depending on the amount of RAM (4-16GB). There’s a 32GB variant but that’s overkill for most of my use cases.

load more comments (1 replies)
load more comments
view more: next ›
this post was submitted on 16 Jun 2023
48 points (98.0% liked)

Selfhosted

39257 readers
206 users here now

A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don't control.

Rules:

  1. Be civil: we're here to support and learn from one another. Insults won't be tolerated. Flame wars are frowned upon.

  2. No spam posting.

  3. Posts have to be centered around self-hosting. There are other communities for discussing hardware or home computing. If it's not obvious why your post topic revolves around selfhosting, please include details to make it clear.

  4. Don't duplicate the full text of your blog or github here. Just post the link for folks to click.

  5. Submission headline should match the article title (don’t cherry-pick information from the title to fit your agenda).

  6. No trolling.

Resources:

Any issues on the community? Report it using the report flag.

Questions? DM the mods!

founded 1 year ago
MODERATORS