ErgoMechKeyboards

The price tag on it feels ridiculous! I saw a youtuber call it "eyewatering" which I very much agree with. Part of the reason why I ended up writing this was to understand the price the spectrum of other comparable boards (that yikes, I've paid for!). I am more comfortable with the price now, haha

Alright, these are my experiences with the Advantage360 Pro and Glove80.

Let me start with two disclaimers. First of all, the Advantage360 is a great ergo keyboard. It ticks off a lot of ergo features and I can fully understand that people are happy with it. Secondly, I have had my Glove80 just over a week. I plan to write up an actual review after one or two months. These are just my initial impressions and my opinions may still change after using the Glove80 for a longer period.

So, I should probably first say why I sold my 360 Pro after six months. Prior to the 360 Pro I was using and Advantage2 and life was good. Ehm, I mean I was really happy with it. Of course, the Advantage2 is largely a 30 year old design, so it has its shortcomings, such as no adjustable split and no adjustable tenting. So, I was very interested in getting a 360 when it came out, since it would solve these shortcomings of the Advantage2.

Initially I got a regular 360, but I returned it the next day, because the firmware had some serious bugs. Eg. the keyboard regularly froze while the V-Drive was mounted and there were bugs around macros. Also the keyboard was sold by the distributor as new, it had clearly been used before (there was damage from optional magnetic palm pads). So I tried it for maybe 30 minutes and then exchanged it with the 360 Pro.

The 360 Pro initially had really bad Bluetooth issues. When the keyboard was turned off or when flashing a new firmware/layout, it usually took 1-2 minutes of meticulous power cycle timing to get the halves to link again. This got better with subsequent firmware versions, but still required meticulous timing except I'd get it connected after one or two attempts.

However, the worse issue for me were the switches. Cherry Brown switches used in the Advantage2 are not known for their smooth and sharp tactility. But for me the Gateron Browns in the 360 Pro are really tiring to type on. I discovered pretty quickly that in contrast to the Cherry Browns they don't actuate at 2mm, but close to 3mm. So typing is simply much more work for each finger.

Then there were more minor issues like that the ABS keycaps that the 360 Pro come feel quite bad. I did replace them with PBT keycaps. But it's weird that a 620 Euro keyboard needs another 60 Euro upgrade to get decent key caps. Also the keycap profiles are (IMO) a regression compared to the Advantage2

the spherical home row caps on the Advantage2 are nicer than the bland caps on the 360, also the 360 removed much of the staircase effect from the thumb cluster, making it harder to reach the upper keys.

Finally, the Advantage360 does not address an important shortcoming that goes back to the original Kinesis Contoured Keyboard - most people with regular or small hands can only reach two keys on each thumb cluster (four in total) without extreme stretching or moving your hand.

All in all, even though the Advantage360 Pro is much more expensive in Europe than the Advantage2, it feels like a side-grade from the Advantage2. It brings variable tenting, a variable split, and better acoustics. But it has (IMO) worse switches, Bluetooth issues, and worse keycaps. After a while I switched back to the Advantage2 because the switches were just less tiring and the 360 Pro was collecting dust (and then I sold it to recoup some of the cost).

I went back and forth a lot on whether I should buy a Glove80. My largest worry were the Choc switches. I have built some custom keyboards before with Choc switches and was never a big fan. However, I am glad that I eventually bit the bullet and ordered the Glove80.

One thing that immediately noticed when I started using the Glove80 is that the key wells feel better. I haven't discovered all the reasons yet, but one thing that immediately jumped out for me was that the pinky columns feel nicer and that the pinky keys are easier to reach. If you look at the keyboard and your hand it's pretty evident why. If you put your hand flat on the table, you can see that your pinky is much shorter than your ring finger. Both the Advantage and Glove80 account for this by moving the pinky column slighly towards the palm/wrist, but as importantly, they have a significantly raised pinky column. However, if you curl up your fingers or make a fist, you see that the length difference between the pinky and ring finger is almost gone. The Advantage does not account for this, the lower pinky rows are still raised compared to the ring finger rows. This makes typing with the pinky on the lower rows less pleasant. On the Glove80 the height of the pinky row converges towards the height of the ring finger rows in the lower rows. This makes typing with the pinky on the lower rows much more pleasant. The key wells feel different in other ways as well, but I haven't investigated what the differences are yet :).

Another thing immediately jumps out is the thumb cluster. In contrast to the Advantage thumb cluster, the Glove 80 thumb cluster follows the thumb arc when you move the thumb outwards and has a raised second thumb cluster layer. I have average-sized hands and I can use more thumb cluster keys comfortably, which is definitely a win.

The tenting mechanism on the 360 is easier to use than that on the Glove80. But I always had the issue that none of the tenting degrees was exactly right for me. I often felt like the ideal degree on the 360 was somewhere between the lowest and the middle setting. So after a while I started to switch several times a day. It took me 30-60 minutes to tweak tenting on the Glove80, but that put it at a setting that I really like and feels good.

Wrt. to Bluetooth connectivity, after using the 360 Pro, I thought that the difficulty getting halves to link was an ZMK issue. But it turns out I was wrong. For me, so far the Glove80 halves have always linked immediately. No matter when I turn on each halve, it simply hasn't been an issue.

Finally, the convex keycaps feel great (they are made to make it easy to move upwards and downwards). I expected that I would be bothered with the uniform profile, but with the curvature of the key wells and the shape of the keycaps I don't have any trouble finding keys. And it's nice that you can rearrange the caps as a result of the uniform profile (which I like as a Colemak-DH user). I went with Choc Red switches and they don't bother me in daily use. They may not be silky smooth, lubed with Tibetan mountain goat saliva or whatever, but during multiple days of work they didn't bother me and that is all I ask for. Plus there are multiple switch options to choose from (including soldering your own).

So far I haven't really found anything negative, except that hopefully one day it will also be available in local ergo shops so that people can try it out + next day shipping.

Ok, this got a bit longer than I expected. But summarized my current feeling is that while the 360 is mostly a side-grade, the Glove80 is really an evolutionary step forward in contoured keyboards.

Speaking of which, a good comparison between KA360 and Glove80 would be interesting…

There were some earlier comparative reviews of both. I had the 360 Pro, but sold it after 6 months (also an Advantage2 user). I now have the Glove80 (actually, more than one 🙈). I just had it for over a week, but my initial impressions are that it improves over the Advantage360 in many ways. I plan to write a review of the Glove80 after using it for a while, but I could write up my current impressions later tonight.

I'm really glad to know that I'm not the only person with reliability issues with the Dactyl!

Ahh, the Glove80. I've never used it so this is only speculation. I ultimately chose the KA360 over the Glove80 because I think the 50g choc springs on them are likely to be too heavy, and I've met somebody whose already pulled a switch off the Glove80 while trying to change keycaps, so the build quality is suspicious. Also, I just haven't found choc switches to be worth the premium price tag (yet! this space is rapidly changing as we speak). I think its a very exciting product, though, and I think as they figure out their issues I will eventually be a customer.

Its where caps lock normally is on a mac keyboard by default, although I've remapped my esc to a thumb cluster.