this post was submitted on 11 Feb 2024
12 points (100.0% liked)

Buildapc

3803 readers
12 users here now

founded 1 year ago
MODERATORS
[email protected]
12
Display issue (lemmy.world)
submitted 9 months ago by [email protected] to c/[email protected]
31 comments fedilink hide all child comments
 

I finished building my PC recently. when I turn on the monitor when the computer isn't on, there's obviously no signal and I see the bouncing logo, but when the computer is on, it says that there is no signal, and that my monitor is going into standby mode, and the display turns off. my gpu seems to be working fine, and I reseated my ram. What should I do?

you are viewing a single comment's thread
view the rest of the comments
[–] [email protected] 2 points 9 months ago (1 children)

It does. I notice that the CPU light turns on briefly but turns off. Is that bad?

[–] [email protected] 5 points 9 months ago* (last edited 9 months ago) (1 children)

You should lookup your motherboard manual or something to see what the LEDs mean. From what you say here, it sounds like the POST might be failing due to the CPU. Maybe try reinserting the CPU.

It could also be that it posts but then it should display and let you get into the bios. So not sure. It's hard to diagnose without more info.

[–] [email protected] 2 points 9 months ago (1 children)

The light means that the CPU is not detected, but it turns off quickly

[–] [email protected] 1 points 9 months ago (1 children)

Try reseating your CPU, check the pins to make sure you didn't bend one. Taking some photos and zooming in can help you get a better look.

[–] [email protected] 1 points 9 months ago (1 children)

According to the manual all of the lights are supposed to turn on briefly.

[–] [email protected] 2 points 9 months ago (1 children)

Sorry got busy and work. Any luck? None of lights stay on?

If not I would just double check and reseat everything, and for shits and giggles pull the cmos battery for 30s and put it back, if you haven't already.

If nothing else works I would be thinking about RMAing the mobo.

[–] [email protected] 1 points 9 months ago

Only the boot light stays on even though I have a boot device. (And am trying to boot into bios)