this post was submitted on 16 Nov 2023
9 points (100.0% liked)
Ask Electronics
3315 readers
1 users here now
For questions about component-level electronic circuits, tools and equipment.
Rules
1: Be nice.
2: Be on-topic (eg: Electronic, not electrical).
3: No commercial stuff, buying, selling or valuations.
4: Be safe.
founded 1 year ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
In seconds? Wow. I think you're right, you might need more than a small fan!
It might be worth exploring heat pipes or peltier effect coolers. The latter makes the problem worse (they are inefficient and generate a lot of heat) but your LED can be locally cooler if you can e.g. move all that extra heat into a big heatsink (also condensation can be problematic).
One cheap source of heat pipes for testing could be old graphics cards -- they often outperform simple copper heat sinks. Use thermal epoxy to stick your LED to it and see if the performance is acceptable. On the exotic end of things, you could also water/oil cool it, or (carefully) make your own thermal grease from industrial diamond powder for a small boost in thermal conductivity.
Also even at 95% efficiency, it sounds like your boost converter has some heat to dump too!
Yeah the problem is the light makes so much heat(the boost as well) that i cant dump it into the air with high enough efficiency. The bodys going to be aluminium and the pcb copper.
Hm, that reminds me! If you're designing your own PCB, some manufacturers will make the PCB out of aluminum for you instead of FR4. This is commonly used for high-intensity LED lights to help keep them cool.
Here's some random info about them so you can see what I mean:
https://www.pcbgogo.com/Article/An_Introduction_to_Aluminum_PCBs_by_PCBGOGO.html
An alternative would be copper-clad polyimide adhered to the body. That also has better thermal properties than FR4.
I was already planning to use a copper core pcb. This is pretty common among insanely powerfull lights. The flashlight community has some great examples. But most of these lights use resistor based voltage regulators which waste a lot of energy in the form of heat so im trying to improve on the traditional design.
That sounds even better!