86
4k is not 2160p - heard it here first!
(www.dexerto.com)
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
this post was submitted on 18 Aug 2023
86 points (81.2% liked)
Games
31806 readers
1412 users here now
Welcome to the largest gaming community on Lemmy! Discussion for all kinds of games. Video games, tabletop games, card games etc.
Weekly Threads:
Rules:
-
Submissions have to be related to games
-
No bigotry or harassment, be civil
-
No excessive self-promotion
-
Stay on-topic; no memes, funny videos, giveaways, reposts, or low-effort posts
-
Mark Spoilers and NSFW
-
No linking to piracy
More information about the community rules can be found here.
founded 1 year ago
MODERATORS
1080p 1080i 720p (IE the i/p suffix) denotes a SMPTE resolution and timing.
HD/FHD/UHD (720,1080,2160 respectively) also denote SMPTE resolutions and timings.
These are SMPTE ST2036-1 standards, which are 16:9 and have defined (but not arbitrary) frame rates up to 120fps.
4k DCI is still a SMPTE timing, but used for cinema and is generally 24fps (tho can be 48fps for 2k DCI).
It's SMPTE 428-1.
There are other "4k" standards, but not nearly as common.
If you have arbitrary resolutions or timings outside of the SMPTE standards, and generally fall into VESA standard resolution/timings or custom EDID resolution/timings.
Chances are your computer is actually running 1920x1080@60 CVT-RB rather than 1080p60.
Whilst 1080p60 and 1920x1080@60 seem like they should be the same, some displays (and devices) might only support SMPTE timings or VESA timings.
So, although a display is 1920x1080 it might expect SMPTE, but the device can only output VESA.
Wow. This was very informative. Thanks!
No problem.
Displays, resolutions, framrates, edids are all very complex. And marketing muddies the water!
I've encountered this issue before when using BlackMagic equipment.
What I was plugging into was described to me as "1080p".
Laptop directly into it would work, and it looked like 1080p in windows display management.
Going through BlackMagic SDI converters (SDI is a SMPTE standard protocol, so these boxes went hdmi->sdi, sdi cable, sdi->hdmi, and would only support SMPTE resolutions/timings), the display wouldn't work.
Because the display was VESA only.
I then read a lot about SMPTE, VESA, and EDIDs!