Cars - For Car Enthusiasts

Your rockauto links got truncated and don't work.

Let's think for a bit about why we slot and drill rotors. Slotted/drilled rotors do little to nothing for cooling- the surface area they add is minimal and the airflow passages tiny. They are instead designed to allow wear debris and any gas released from the brake pads during hard, super hot stops to be vented away from the friction surface, effectively "cleaning" the pads with every wheel rotation and allowing more consistent brake performance.
Their downside is this cleaning action tends to pull pad material off too, so your pads wear faster. Not too big a deal for track tho since you should be inspecting pads and changing them frequently during track use.

Generally these features are more important for non-asbestos organic brake pads which can offgas a lot, and when this gas becomes trapped between the pad and the rotor it acts like a lubricant and reduces braking efficiency. Ceramic and metallic pads do offgas and will sew some benefit, but not to the same extreme since they handle heat better anyway.

Yes, they can crack around the holes. Any feature like that can be a stress riser and propagation point for cracks when under high thermal stress. However you'll be able to see the cracks in the polished rotor surface before your rotors are likely to fail- that cast high-carbon steel is surprisingly strong and resilient. And lets be real- Rotors aren't that expensive. If replacing a $250 set of rockauto rotors every year or two is an undue expense... uh, no offense- but you probably shouldn't be tracking your fucking daily. This game is pay to play.

So where does that leave you? The honest answer is "you won't notice". The drilled rotors will improve pad performance a bit, and while cracking is possible it won't be dangerous. They will not improve cooling enough to see a noticable improvement, and frankly you will far and away be limited by the calipers piston size and hydraulic system force long before you'll reach the pad and rotor's limitations, and when you do hit your heat limit, holes and slots won't help.

Honestly, I'd get the normal high-carbon rotors for now. You can get fancy later on when you want to do a proper brake system upgrade with significantly larger rotors, calipers and pad area, which will see real improvements in brake performance and where the pad cleaning action of slots will start to matter.