this post was submitted on 21 Jan 2025
3 points (100.0% liked)
Photography
1 readers
77 users here now
All things photography. Share your own original photos, your questions, your inspiration.
Rules
Share your own original photography. No NSFW images. Be Nice.
founded 2 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
This distinctive stacked dual antenna arrangement is used to lower the radiation angle of the antenna, concentrating transmitted power to the "ground wave" and reducing energy that would otherwise be sent upward into the sky.
The smaller (300 foot) freestanding mast in the background left is not in current use. It can be used as an emergency spare antenna for KNBR during maintenance of the taller main antenna.
@[email protected] Interesting enough, another result is that the audio frequency bandwidth is a bit restricted. When Susquehanna owned KNBR, they tried to broadcast HD on it but found they couldn't because of HD's bandwidth requirements. Most listeners wouldn't notice the restricted bandwidth, since the NRSC standard limits bandwidth to ± 10 kHz and almost no modern AM receivers can go that far up anyway.
The antenna field is in the final approach and takeoff flightpath for SFO airport's runways 28L/R (and 10L/R), and so the site has special markings to warn pilots of a collision hazard. In addition to the usual tower lights and red/white paint, 3-dimensional "HAZ" warnings were installed around the field. These are easily visible in areal photos; see, e.g., https://earth.google.com/web/@37.5471204,-122.23429544,0.73120256a,577.14725587d,35y,0.01179999h,0t,0r/data=CgRCAggBQgIIAEoNCP___________wEQAA
Note, important safety tip: you can get closer to this tower without clearly trespassing or jumping fences than most other 50KW broadcast antennas I've encountered. I measured a field strength of over 80V/m a bit outside the tower fence, which is an incredibly strong signal (though still within OSHA limits at the frequency involved).
Resist any temptation to jump the fence and climb the (energized) tower. You'd be electrocuted as soon as you touch it.
@[email protected] Interesting I'm going to do some field tests for interference for a wildlife monitoring radio system & I'm wondering what you used to measure this
@mwhelm For AM, the instruments of choice are the Potomac FIM-41 or PI-4100 (the former being older, analog, and more fun to use, the latter being soulless, digital, and easier to use).
@[email protected]
@[email protected] there may be a literal pair of smoking boots as the only remaining evidence.
@greem @mattblaze I’ve seen that movie.
@20002ist @greem I don't think you want to look in the trunk, officer...
@[email protected] @[email protected] The actual line is even better.
@[email protected] @[email protected] Proof that "You don't want to look in there" > "I do not consent to a search"
@[email protected] @[email protected] @[email protected] I’m gleeful to see the absolute best film ever made finally referenced here. Laughing aloud, thanks
@[email protected]
Ever since I saw this video by @[email protected], I realized that respect for towers could be life-saving.
https://youtu.be/GgDxXDV4_hc
@mattblaze
To your point:
https://www.youtube.com/watch?v=GgDxXDV4%5C_hc
@HikerGeek @mattblaze
Wow. 😎 I was a radio DJ for a couple years but did *not* know this. Is it same for AM and FM?
@ColesStreetPothole @HikerGeek No; FM broadcast antennas are comparatively quite small. The tower structures for them are just to get them up high and should not themselves be energized with RF. But the RF fields near the antennas can reach dangerous levels. (You can't go to the roof of the World Trade Center, which hosts a bunch of FM and TV stations, without special precautions, for example).
@[email protected] @[email protected] Ah, okay. I was an FM jockey, but we never got to see the tower, it was miles away.
@HikerGeek @mattblaze Jeff Geerling can be pretty funny.
How are such towers climbed safely if a technician is needed?
@JamieGC @HikerGeek You turn the transmitter off first.
@[email protected] @[email protected] that should have been obvious I suppose. 🙂