r/overclocking - for those who like to push their chips a little harder

The original post: /r/overclocking by /u/Brilliant-Rub-9244 on 2024-11-11 02:55:34.

The original post: /r/overclocking by /u/CSS_GamezYT on 2024-11-11 02:37:21.

---

I'm looking for a software that would show the average and peak temperature, usage, and power draw. I'm not sure if HWInfo64 would log that, because I need the information to record for a high school science fair.

The original post: /r/overclocking by /u/Heym21 on 2024-11-11 01:35:44.

---

Recently overclocked my CPU (Ryzen 9 9900x) and was curious if its going to degrade or ruin my CPU/performance if i leave it OC 24/7. Every now and then my computer does freeze but overall performance on games is great. I overclocked 200+ on precision boost drive with an undervolt on the new curve feature

The original post: /r/overclocking by /u/Matrixholo on 2024-11-11 01:19:38.

---

Every time I tried to boot into the BIOS, I got a black screen with a white freezing underscore on the top left of my monitor when I disabled MCR and Power Down. Enabling them improved the boot time and I can go to BIOS without any issue. But I don't know if leaving the MCR and Power Down enable harms the system long-term or not. I really can't tell if I see any difference in terms of latency and whatnot. I also enabled EXPO and left the RAM run at 6000mhz (default was 4800mhz), and did some light OC + UV ([email protected]) on the 7600x as well.

My specs:

https://fr.pcpartpicker.com/list/TXb2t7

The original post: /r/overclocking by /u/Extension-Milk9253 on 2024-11-10 22:56:48.

---

Hi, I'm very new to overclocking and wanted to mess around with it. My friend helped me a bit, and I use intels XTU to overclock. I have got it stable at 5.6 GHz with volt offset to -0,130 V and a cinebench r23 score of 26188. He said it was really good. I wondered what is normal for the 14000kf?

The original post: /r/overclocking by /u/Dependent_Feed_2489 on 2024-11-10 22:50:00.

---

Hi

Is my PC worth overclocking ? How much improvement can I get by OC ?

I have CPU: i7 3770k (Ivy Bridge, 22 nm ), cpu cooler: ARCTIC Freezer 13, Motherboard: Gigabyte Z77X-D3H, Ram: DDR3 16 GB Kingston Hyper Blue, Graph.Card: NVidia GeForce GTX 1050  Ti (GP 107, Gainward, 14nm, 607 MHz),

I have no experience with OC, no prior knowledge with it .. and I don’t feel need for itright now (I dont play games right now, I just use pc for normal work) .. but I think I should be prepared to do OC in the near future ..

So, main question is: Is it worth overclocking ? How much improvement can I get from OC?

Secondary question: Any reccomendations how to do it ? Quick search told me that I shouls set CPU Multiplier to 42 - 46, set memory multiplier 16 - 26 ?, Vcore up to 1.35 , tempriture to keep lower than 80-85 C ?

Third qeestion: Will OC cause CPU to die after few years ?

The original post: /r/overclocking by /u/Kev012in on 2024-11-10 22:47:51.

The original post: /r/overclocking by /u/Altruistic_Let_4589 on 2024-11-10 22:17:04.

---

My 10600K processor is reaching temperatures of 70°C at idle and over 100°C with restarts under heavy load. This is happening even with Turbo Boost disabled, all cores set to a ratio of 39, and a negative voltage offset of -0.100.

I don’t know what else to do to get decent temperatures. My cooling is an ID Cooling FrostFlow 240, and it seems to be properly installed. I’m using Arctic MX4 thermal paste.

Any help is welcome

The original post: /r/overclocking by /u/PlanetDyna on 2024-11-10 22:08:45.

---

Running my WS790 Server with an Intel ARC. Any way to reduce power consumption?

The original post: /r/overclocking by /u/GoodRead89 on 2024-11-10 21:45:46.

---

So I've been using for some year my Ryzen , but now I see now and there that I should consider overclocking.

Maybe there is some tutorial for exact mobo aswell?

System : Ryzen 9 5950x Mob: MSI MAG X570S TOMAHAWK MAX WIFI Ram: Corsair DOMINATOR PLATINUM RGB 128GB (4x32GB) DDR4 3600MHz C18 Cooling: AIO 360

I've tried Ryzen Master but doesn't seems that I'd does lot. So idea is to try bios settings .

The original post: /r/overclocking by /u/Chriz_Chrone on 2024-11-10 20:58:05.

---

Hello hello.

I just got back into overclocking after a bit of absence and redid my RAM Oc completely.

-I dont think naming my parts or shit is important for this question so I will let it be for now-

My problem: After now getting my OC done and having it 100% stable I am doing more and more bechnmarks to chwck the performance increase or decrease.

I went from 3600MT/s to 4133MT/s on the same primary and tertiary timings, only slightly more lose secondaries.

However, now the cpu performance (unoverclocked, 100% stable) took a hit while I noticed that according to 30 runs on Aida64 in windows safemode (and their average) the available bandwidth on the new OC of 4133MT/s significantly decreased compared to before. The average displayed bandwidth lies at only 50.000 on Read and around half of that on Write (which makes sense since the cpu is a Ryzen 7 5700x). I tried checking for new updates, bios and chipset, also any programs that may cause issues, and windows but could find nothing. The performance hit is quite big too, especially, and oddly enough in CinebenchR23 and R24, where my maximum scores went down 600 points and 100 points respectively.

Any ideas or fixes are greatly appreciated.

Also sorry for bad english, it is jot my first language.

The original post: /r/overclocking by /u/coldcathodes on 2024-11-10 20:27:18.

---

Has anyone experienced degradation after the latest microcode for 13th and 14th gen? If you have, please say how long you've had your cpu or if it's a fresh rma. Also if you had any OC set and the frequency and vcore you're running at.

The original post: /r/overclocking by /u/Original-Nerve-858 on 2024-11-10 19:59:41.

The original post: /r/overclocking by /u/Secure-Percentage-93 on 2024-11-10 19:38:23.

---

Info CTR 2.5

Final ranking of cores:

by AMD (CPPC) | by real frequency

C04 161 5000MHz | C06 5000MHz

C03 161 5000MHz | C04 5000MHz

C02 157 4975MHz | C03 5000MHz

C01 153 4950MHz | C02 4975MHz

C08 149 4950MHz | C08 4950MHz

C06 145 5000MHz | C01 4950MHz

C07 141 4925MHz | C07 4925MHz

C05 137 4900MHz | C05 4900MHz

Unreceived frequency due to incorrect CPPC tags

1T 0MHz

2T 0MHz

3T 25MHz

4T 25MHz

5T 0MHz

6T 0MHz

7T 0MHz

8T 0MHz

CURVE OPTIMIZER values for BIOS

(If you do not plan to use HYDRA)

C01 SAFE CO: -24 MID CO: -29 FAST CO: -30

C02 SAFE CO: -30 MID CO: -30 FAST CO: -30

C03 SAFE CO: -18 MID CO: -21 FAST CO: -27

C04 SAFE CO: -17 MID CO: -20 FAST CO: -25

C05 SAFE CO: -28 MID CO: -30 FAST CO: -30

C06 SAFE CO: -30 MID CO: -30 FAST CO: -30

C07 SAFE CO: -30 MID CO: -30 FAST CO: -30

C08 SAFE CO: -30 MID CO: -30 FAST CO: -30

my timings memory

Imgur: The magic of the Internet

fclk 1900/2000 WHEA 19 Events

The original post: /r/overclocking by /u/LKSk547 on 2024-11-10 18:59:21.

---

I wanted to make my GPU run faster, cause why not, so I added clock speed without increasing the voltage (cause HP locked it) and this is the maximum stable clocks that I could do, I also added +525MHz on the memory. I am not sure if it is a good curve or not cause I am new in overclocking. I get 8314 points in Time Spy, before the overclock it was like 7500

https://preview.redd.it/feaxf3ovf40e1.png?width=1173&format=png&auto=webp&s=666fc48b1ee672c7e839caba872905d59f5ff437

The original post: /r/overclocking by /u/Visible-Impact1259 on 2024-11-10 18:13:21.

---

I’m running my 7800x3d on a negative curve per core and PBO. Max boost I can achieve is a little over 5ghz. Could I get a higher boost by raising the bclk?

The original post: /r/overclocking by /u/Valuable_Fix_7209 on 2024-11-10 17:59:26.

---

Hi guys, i have processor Intel(R) Core(TM) i5-7400 3.00 GHz, 16 GB RAM. I played fortnite but before few months my processor goes 100% when i play radom games. I dont know what is problem. I have Geaohic Card Nvidia RTX 2060. I tried method on YouTube to increase less usage on my CPU. But didnt work. I dont know is it because pasta or some thing virus or something. I have Avast premium and i doesnt have virus said Avast. Can someone help me bc i thinking to buy a new processor if I dont fine some solution for my problem. Thanks

The original post: /r/overclocking by /u/Melodic-Earth6971 on 2024-11-10 17:31:13.

---

I have a laptop running windows 11 with an mx450 and an i5 11th gen. I wanted to overclock my gpu. Ive never done it before and I have no clue how to do so, all the videos I watched on the subject told me to use the overclocking scanner in msi afterburner, but I keep getting this error " VEN_10DE&DEV_1F97&SUBSYS_3F9217AA&REV_A1&BUS_43&DEV_0&FN_0" I have allowed access to GPU counters for all apps. How do I fix this, and is there any other way of overclocking it I'm currently getting decent frames but I'm having frequent stutters.

The original post: /r/overclocking by /u/Funny-Wealth8235 on 2024-11-10 17:02:53.

The original post: /r/overclocking by /u/sQuilibrium on 2024-11-10 16:33:34.

---

Hi guys.

Unfortunately I couldn't stabilize the system with the RAM at 7800 MHz, so I had to lower the clock to 7600 MHz working on teaming and power supplies.

I'll share the parameters I set in my BIOS:

Ai Tweaker

│

├── Ai Overclock Tuner [Manual]

├── Memory Controller: DRAM Frequency Ratio [1:2]

│

├── DRAM Frequency [7600 MHz]

│

├── DRAM Timing Control

│ ├── Primary Timings

│ │ ├── DRAM CAS# Latency [36]

│ │ ├── DRAM RAS# to CAS# Delay Read [44]

│ │ ├── DRAM RAS# to CAS# Delay Write [44]

│ │ ├── DRAM RAS# PRE Time [46]

│ │ ├── DRAM RAS# ACT Time [128]

│ │ └── DRAM Command Rate [2N]

│ │

│ └── Secondary Timings

│ ├── DRAM Refresh Interval [40000]

│ └── DRAM Four ACT WIN Time [40]

│

├── DIGI+ VRM

│ ├── CPU Input Voltage Load-Line Calibration [Level 2]

│ └── CPU Load-Line Calibration [Level 5]

│

├── Actual VRM Core Voltage [Manual Mode]

│ └── CPU Core Voltage Override [1.34V]

│

├── High DRAM Voltage Mode [Enabled]

│

├── DRAM VDD Voltage [1.51V]

│

└── DRAM VDDQ Voltage [1.51V]

And I'll share my configuration with the tests I ran:

HWiNFO:

https://preview.redd.it/yocrjk30o30e1.jpg?width=1140&format=pjpg&auto=webp&s=461c7f1953c27da176af5b2029d62a4e911aee6f

CPU-Z:

https://preview.redd.it/unawuld4o30e1.jpg?width=417&format=pjpg&auto=webp&s=e6dc068ab652c5fa59591404f3e75b206790f420

https://preview.redd.it/7a80bmd4o30e1.jpg?width=417&format=pjpg&auto=webp&s=67cd16021c786930adb22be81adeb03a04f83f12

https://preview.redd.it/cna7vmd4o30e1.jpg?width=411&format=pjpg&auto=webp&s=f7da8f63729126f2fbabb2dbfb5c75ed20d93aa0

https://preview.redd.it/a9f5o2ubo30e1.jpg?width=407&format=pjpg&auto=webp&s=2ab2ab590f285d7516c411fa0b90ceab21e4e95a

AIDA64:

https://preview.redd.it/2x252tddo30e1.jpg?width=534&format=pjpg&auto=webp&s=937006913b67bb1e7e714d937e494e23dcbf8e90

Cinebench R32:

https://preview.redd.it/84tyzpcdo30e1.jpg?width=358&format=pjpg&auto=webp&s=5c70f6962d8329f88a4ee48c5c77804ecb203a84

3DMark:

https://preview.redd.it/73f8okjyo30e1.jpg?width=1336&format=pjpg&auto=webp&s=04a5a767938347ad68934f52eee32069d453bd16

https://preview.redd.it/uy0vwyzeo30e1.jpg?width=660&format=pjpg&auto=webp&s=a9ed633cc852b8240355d0e1d19a3e57d0919de7

Geekbench 6:

https://preview.redd.it/5byxe3hfo30e1.jpg?width=828&format=pjpg&auto=webp&s=262a1b442f85ac047f465fd389c42364ea4589f0

https://preview.redd.it/2p4ww2cho30e1.jpg?width=832&format=pjpg&auto=webp&s=ccb86a1acedc060b43660a2ec970fa822e72851c

I hope this post can be useful to someone.

;)

The original post: /r/overclocking by /u/ElNorman69 on 2024-11-10 16:22:45.

---

Hello! I got a max-q 4060 automatically undervolted+oc'ed by acer's Nitrosense profile.

My card has a fixed power limit of 85watts and gets overclocked by 100+ mhz on the core clock and 200mhz on the memory when enabling the turbo profile. As I guessed this to be some kind of undervolt+oc, i tried to add 150 mhz more to the clock, the power limit was indeed still locked to 85watts(so the card wasn't drawing more than 85w), but the core did overclock by 250mhz total.

---

I tried doing the same thing with the 70watts profile, where the card get's oc'ced by the same amount of turbo mode, but when i tried adding 150mhz to the clock, the game i was using to test my OC (Alan Wake II) crashed after 30 seconds. Temps still seemed to be the same as with the default profile, and power wattage was fixed to 70.

---

Now, my question is, would the crash at 70w be caused by me making the default uv+oc (applied by Nitrosense) unstable? Can I use the turbo mode's profile wattage limit to try and find a stable oc until i get instability?

I'm sorry for the weird formatting, my english is a bit bad and i didn't know how to ask this question otherwise lol.

The original post: /r/overclocking by /u/TheMightyNoxian on 2024-11-10 16:10:38.

---

Eyo, did i just lost silicone lottery not bein able to go beyond 17 offset all cores ? I know few ppl that got chip that cant even handle 10 tho 😊 im very new to this and been testing for week with different settings, my temps are superior, but when i run occt i get insta death over 17 all cores, llc mode 1

The original post: /r/overclocking by /u/Jumpy-Mycologist5988 on 2024-11-10 15:35:57.

---

My bios is saying to activate cpu_ov to use exp does this ring a bell for anyone?

The original post: /r/overclocking by /u/Downtown-Basket4413 on 2024-11-10 14:58:58.

---

Hello , I just did a FurMark test on my 3060 ti 8gb for 20 minutes , and I got a score of 7835 and avg fps of 130, is this good or is it barely good? it didn't crash or restart during the test so I assume it's good right? because recently I've been having blue screens and my stream would crash and lag, in addition to hardware errors on the reliability history so I tested ram, cpu, and gpu and all seem fine. I formatted my pc and did the test , and here's the result:

https://preview.redd.it/ems7mjx9930e1.png?width=955&format=png&auto=webp&s=4f41f62e680798a7a14a1a0b1a43f6791a5af2bc

https://preview.redd.it/h9d7yxaa930e1.png?width=704&format=png&auto=webp&s=c05cbc8fa3a2591c880220699335012a2eaf3cf6

The original post: /r/overclocking by /u/Moushen_Sickness on 2024-11-10 14:49:02.

---

Are there any improvements to be made? Not looking for max OC. My 6400 will not run in gear 1, so looking for tightest Gear1 6000m/t settings.

https://preview.redd.it/hrftsndv630e1.png?width=386&format=png&auto=webp&s=7ec9473d3d83421d2b8bfba6861e5f55057a3fde