So my plan based on reading was to get a mini pc and a nas. But then I realized... what is the best way to connect them. So I started doing more reading. And I confused myself.

So a NAS has it's own CPU and such, and other computers can talk directly to it over the network. But if I am using a mini pc to run the server, then I assume I would want a really fast direct connection to the storage. So it seems like I would want the NAS to be on the network as well as directly connected to the mini PC. And of course the mini pc would need to be on the network as well. Stuff I saw about connecting them directly seemed to pretty much use the Ethernet ports and a crossover cable. So that would mean that both devices would have to have two Ethernet ports, right?

And the bonus question is, would it just be better for the NAS to really be a dumb DAS for the mini pc instead?

Edit to summarize: For having two devices, the consensus is that LAN is good enough (just make sure you have a decent switch between them). A few like doing it all on one device for a variety of reasons.

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 2 points 2 weeks ago (4 children)

Budget is really more about value than anything, I have money to spend, but I don't like to overspend or waste. Otherwise there are things I know, and things I don't. :) I do know linux, and some docker. I have built a few pc's over the years. But I don't really keep up with hardware stuff. The idea to have a NUC and a NAS just came from what I was reading as it seemed to be what people do. And the plan was to get a pre-built NAS and a mini pc. That way the whole project doesn't get so big it is overwhelming. The software stuff can be complicated from what I read. But I work in software, and I could use more time with docker and such. I was pricing things out when I got thinking about the connection between them, and thus how many ethernet ports I needed on the minipc. It sounds like people are saying that network speeds through a switch should be more than fast enough. I know this is probably the more expensive route, but I think the total cost may be at least reasonable. The minipc is like $169. Seems like the NAS is like $500. And a few hundred for drives. So maybe under a k. The way prices are these days, that doesn't feel terrible. But I don't really have a scope on costs for hardware.

[–] [email protected] 1 points 2 weeks ago (3 children)

Sounds like you are on a good path then, mate.

I agree with the route you are taking. It's a great blend between price and performance. My only "last advice" would be to overspec the NAS a little, as it would suck having to replace it next year as your needs change.

Have fun with your project and feel free to reach out should you have any questions.

[–] [email protected] 1 points 2 weeks ago (2 children)

What kind of specs matter most for a NAS?

[–] [email protected] 2 points 1 week ago (1 children)

If you’re going to run the NAS as the media server, you need to go with Intel to get quicksync. This because any file not compatible with your clients will require transcoding and you want that done with hardware, not software. It’s a lot faster. I’m using Synology as the referance point. No idea what the Qnap lineup looks like.

If the NAS is only the file host, then I’d say get at least 4 bays so you have some room to grow and that the CPU is less relevant. Depending on your use case, RAM could be more relevant if you’re running loads of containers. I’d at least get one with an extra slot and/or non-soldered RAM, just in case. You most likely won’t ever need more than stock, but the option is nice. I’m running stock still.

I have the 923+ and have been very happy with it, but Jellyfin is migrated to a N100 NUC. The NAS runs the .arr-suite, qBittorrent, autobrr, Flaresolver, all in Portainer, and I’m installing two 4k cameras soon for Surveilance Station. It’s barely breaking a sweat.

Sorry for the long answer

[–] [email protected] 0 points 1 week ago

Thanks for all the info...