vulkan-nouveau (aka NVK) is no longer experimental and has gotten pretty good with nouveau + GSP binary firmware blobs for Pascal and newer Nvidia cards.

Not complaining, just wondering - I was upgrading my system and noticed that the net upgrade size is -748 MB, with just a few important-looking packages set to be upgraded. So I checked and it's wine - going from 1338 MB (9.9-1) to just 587 MB (9.9-2).

I checked the commits to the package repo, and as far as I can tell, this is the only change between 9.9-1 and 9.9-2 - it removes a bunch of hardening flags and that's it. I know these often come at the price of increasing the final build size, but more than double?

For context, the Arch-wide flags are defined here, if I understand it correctly

I know my way around a command line. I work in IT, but when it comes to my personal fun time more often than not I'm quite lazy. I use windows a lot because just plugging in anything or installing any game and it just working is great.

But support for windows 10 is ending and I should probably switch sonner rather than later, so I'm wondering if Arch would be a good pick for me? For reference, I mostly game and do Godot stuff in my free time.

Hello guys, I'm using Arch as a newbie. Learning about it. But worried about a thing. When I was creating the bootable media for install it, I downloaded the .iso and .iso.sig from any mirror that is near. I followed the things about verification of .iso but I got some errors and gave up. Just used the iso I didn't verificated. I am using the OS that iso installed. There is nothing wrong with usage. I can access all the things about Arch, not had any problems and any performance issues. No special internet usage, no broken things etc. but I'm a bit worried about is there any malicious software such as keyloggers, mining softwares... Can I verify my Arch after the installation? Can I see if there is any software malicious via htop-bpytop? Should I create the bootable media again with verification and reinstall my Arch?

Hi guys,

Anyone old like me who still likes to buy music CDs, but young enough where I want to rip perfect flac files from them? My tool of choice has been exact audio copy for like, ever.

I realized this weekend it’s the only windows software left that I still boot into windows for. Used to be the odd game here and there that didn’t work in linux, but even that has stopped.

Anyways - I’m looking for all the bells and whistles. It handles gaps correctly, can create cue sheets, does error correction, and ultimately allows me to make a 100% backup of a music CD (I can take a blank CD and make a perfect copy of the original). Anything in the AUR that does this? Anyone have success running EAC with proton/wine etc and can offer some tips? Thanks.

I was Nobara user, then I am using Fedora right now. I want to use things like Hyprland etc. and ya know, Its damn cool to say I am using arch btw. So I've decided to use Arch Linux. But everyone says its always breaking and gives problems. That's because of users, not OS.. right? I love to deal with problems but I don't want to waste my time. Is Arch really problemful OS? Should I use it? I know what to do with setup/ usage, the hardness of Arch is not problem for me but I am just concerned about the mindset "Arch always gets broken".

https://gitlab.archlinux.org/archlinux/rfcs/-/merge_requests/32

Can someone help, i have been having trouble connected with my home universities vpn, for past 15-20days, it is an openvpn connection, so i have been using networkmanager-openvpn to import my config files, and they have worked previously, but for last 15-20 days i get connection timed out, all certificates used are correct, i have tried to connect on cli,

Connection activation failed: The connection attempt timed out

and it suggests to check journalctl logs (nothing erroneous i could find) i am also able to connect with this vpn with my phone (with openvpn official app with same files), and also i am able to connect to proton's vpns with my laptop, so i guess my device is not completely broken, i have tried to redownload my certificate files, recreating vpn profile, reinstalling networkmanager, nothing worked

I've been trying various Linux flavours every year for 10 years or so. The last year I tried Arch, then EndeavourOS, which has been my most successful Linux exploration I've ever had, and given me huge hope. However, there are still a few things preventing me switching it to my default OS.

I'll put aside Games that need Anti Cheat, as I doubt that will ever be fully fixed, unless Governments force game devs to support more than just Windows.

Here is what doesn't work for me:

1. Streaming services like NowTV. (Works in Windows in browser only)
2. DRM proected VST's for use with Reaper (not via Wine)
3. Roblox (Using Waydroid was not very successful)
4. Office 365 (I like Libreoffice and OnlyOffice but fact is Word and Excel are just required for some stuff)

I created this small script and thought it might be useful to someone else. Any feedback is welcome!

I watch the F1 on NowTV. In windows this works fine in Firefox but not in Linux. My research turned up various posts linking to the "widevine" package that depends on "glibc-widevine" but that seems to have disappeared. What happened to it? did it work? where can I get it? is there an alternative?

As title says.

I've followed this guide, everything is working as desired but I got myself thinking if it'd be possible in the future to add a second nvme (I have a 1 TB nvme now). I've googled a little but all that I found so far apparently was about expanding the very same drive used in the installation, not adding a second one.

Could anyone more experienced tell me if that's is possible in this context and, if so, point me in the right direction?

Okay so I just finished struggling through my archlinux install. I have arch Linux with hyprland now.

But I cannot figure out how to download anything.

At minimum i need a browser, and git. But I cannot figure out web downloads in kitty.

Edit: nmtui to connect to WiFi, and then a reboot solved it.

How do non explicitly installed package dependencies get updated in Arch? Do they update independently of the package that is dependent on them, or do they get updated when the parent package updates? Or is it some secret third thing?

Thanks!

cross-posted from: https://programming.dev/post/13156830

https://codeberg.org/cyber-luna/lunas

Archlinux: yay -S lunas

i made a versatile syncing cli program, lunas, that's capable of syncing local to local, local to remote, remote to local and remote to remote at the same time with many input directories, with their file attributes if enabled and more. It syncs both ways but it has src/dest options that can be assigned to individual input directories

it runs locally, unless remote syncing is used then it runs peer-to-peer using libssh/sftp

It can do sync removal between different input directories, meaning if u want to remove a file/directory that you don't want to sync back to other directories, you can "lunas -rm file" for local or "lunas -rrm user@ip:/path/to/dir" for remote and then use the option "-cr Y" while syncing to remove it from every other directories, or simply don't use this option and it should be ignored without removal, or "-cr S" and it should be synced back to the directory it was removed from, IF it was found in one of the other directories

it has an optional config file for defining presets for easier syncing instead of writing them each time in the cli

there are more options to it which can be found in the --help or in the man page for more details

a simple usage of lunas can be like this

lunas -p dir1 -p dir2 --dry-run

lunas -s dir1 -d dir2 -d dir3 -rd user@ip:dir4

lunas -r user@ip:dir1 -d dir2 -dr

lunas -rs user@ip:dir1 -d dir2 -cr Y

lunas -rd user@ip:dir1 -s dir2

lunas -p dir1 -p dir2 -p dir3 -p user@ip:dir4 -p user@ip:dir5

p: local path r: remote path , both of them are source and destination

s: source local path d: destination local path

rs: source remote path rd: destination remote path

-dr/--dry-run: outputs what would be synced without actually syncing them

-cr/--confirm-remove Y: confirms the sync removal as explained previously

Hey everyone, I'm currently trying out river wm. For some reason, actions that should invoke the file picker dialog (like uploading a file to a webpage) fail to bring up the dialog and just do nothing.

I've tried this in firefox and chromium to no avail in river, though they both work as expected in other window managers (I've tested sway and labwc). Anyone run into this issue before?

I'm running an nvidia card on X11 Plasma 6, with a 4K monitor alongside a QHD monitor. Both monitors are the same physical size, despite being different resolutions, so in the nvidia settings app, I've got the second X screen setup to generate 4K but downscale it to QHD in the output. It makes the second screen slightly blurry, but it's worth it for the ability to move windows back and forth without dealing with different resolutions.

The problem is, no matter what I do, I can't make the changes "stick". The nvidia applet has an option to save it to the x.conf file, and I've verified that it has done so in a text editor. But every time I boot, I have to change it in the nvidia settings applet again.

Is there something I'm missing with the way arch/kde handles x conf files? How do I make it stick between reboots?

Hello! I've got a new Arch install that I'm in the process of setting up, however I wanted to do things differently this time around for the goal of getting this system as stable as possible without sacrificing features. So, the AUR...

I've used yay extensively and paru briefly before, but this time to achieve that goal I wanted to try aurutils with a local repository. I'm in the process of setting that up and using the command: repo-add aur-local.db.tar which gives the output: ==> No changes made to package database.

In all the guides I've gotten open in all these tabs, the output I should be getting starts with this: ==> Creating updated database file...

When I run the command, for a microsecond I get a file appear in Thunar but then disappears. Running pacman -Syy fails as the repo's database file obviously doesn't exist. No matter what I search I can't find anyone else with this problem nor a solution.

My system is a manual Arch installation, no archinstall, using the XFCE desktop. My shell is fish and, I can't see this having any influence whatsoever but my DM is ly.

My pacman.conf: Gitea

My pacman.d/aur-local.conf: Gitea

I have an optimus laptop, and after the update to KDE6 optimus-manager stopped working. I needed a second display, and all my display outputs are on the Nvdia GPU, so I needed to switch. I tried many different X11 configs, envycontrol then more X11 configs, but I couldn't get it working right, it would only be the internal display or the external one, not both. after a few hours I gave up and tried optimus-manager again. This time I checked the error log and it was failing to load the nvidia module, I tried loading it manually but I got a "No such device" error, which is where the title of the post comes in. My GPU has disappeared from linux, it won't show up in lspci, lshw, nvidia-smi, or anything else it should. The only reference to the thing in dmesg I can find are :

[    0.216410] pci 0000:01:00.0: [10de:1ba1] type 00 class 0x030000
[    0.216419] pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
[    0.216427] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.216435] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.216440] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.216445] pci 0000:01:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
[    0.216460] pci 0000:01:00.0: Enabling HDA controller
[    0.257300] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.257300] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    0.270521] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0

and then nothing, it doesn't even seem to try to load the nvidia module. I tried booting into windows and it shows up there fine, so the GPU didn't randomly die.
As far as I can tell I've rolled back everything I did in my histfile until it stopped working, The only thing I could think is I upgraded my kernel to (6.7.9) from (6.6.10), could that have caused it? I also tried adding pcie_port_pm=off to the kernel params from the archwiki, but still nothing. I'm just at a loss here, anyone have any ideas?

EDIT: I'm using the nvidia-dkms package
EDIT2: one kernel downgrade later and it's still not appearing, so thats not it.
EDIT3: fixed, see comments

Hello, I'm facing some rather annoying issues with running KDE6 on Wayland. Despite consulting the Arch Wiki and various online resources, I haven't been able to get it working. X11 works fine, so I've been sticking with X exclusively due to my limited experience with desktop Linux and troubleshooting.

For context, my setup includes an AMD 7950x with Unraid as the main OS. My daily desktop runs on a mainline Arch VM with an RTX 3070ti and a dedicated USB controller card passed through. This setup has been stable for months, serving my gaming and media needs.

When attempting a Wayland session, I select it, observe a brief black screen flash, and then return to the login prompt. This issue persisted through upgrades and tests on different distributions like Manjaro and Endeavor. I've also tried multiple Wayland compositors, all with the same outcome.

The only success I've had with Wayland was on Garuda, which defaults to Wayland. I'm keen on using Wayland due to its evolving features, especially since it's essential for running Waydroid.

Any assistance would be greatly appreciated. While my use case may be unique, Waydroid is crucial for specific Android apps vital to my workflow.

Thanks in advance!

Hi,

I am setting up archlinux on a zenbook pro duo UX582L, everything has been setup and is functional, minus audio.

I am running plasma 6, the latest kernel, and have tried about everything I can find online to get this working.

things I've tried:

Pulseaudio

Pipewire

https://www.reddit.com/r/ASUS/comments/o1k04p/ubuntu_linux_on_ux582_zenbook_duo/

everything relevant at https://wiki.archlinux.org/title/PulseAudio/Troubleshooting

https://www.linux.org/threads/no-sound-on-asus-zenbook-oled-ux3402za.45822/

https://github.com/thor2002ro/asus_zenbook_ux3402za

The speakers are un-muted. They show properly in the volume mixer both in plasma GUI and alsamixer UI, when adjusting audio through the plasma GUI it shows the test tone is being played through the speakers but nothing is played.

any help is appreciated. Thanks-

I was creating a new key for pass when I noticed a random expired GPG key assigned to a certain "Roderick van Domburg" in my list of keys. I don't know any Rodericks, and this laptop has been whipped clean.

Should I be concerned? How could this even happen???