Try alternative UI's. Mlmym with a ui inspired by old.reddit. Alexandrite a new and modern ui. Voyager a mobile ui

1
8
Welcome (self.endlesstalkorg)
submitted 8 months ago* (last edited 7 months ago) by lemmy to c/endlesstalkorg

Welcome!

Many large instances have been struggling to deal with the big increase in users from Reddit.

Therefor I wanted to setup this server to divide the load. I also really like hosting and managing a server, so I thought it was perfect for me


About endlesstalk.org

endlesstalk.org is intended to be a serious long-term instance!

Rules and info can be found in the sidebar.


Technical setup

  • Have been built with redundancy and recoverability in mind
  • Database and images are backed up every 2 hours, so there is always a fallback.
  • Servers for endlesstalk.org are runing in the clould and I strive to get the best mix between stability and pricing.

If you decide to join, let me know of any issues or improvements at issues and improvements

Lastly I would appreciate any donation to cover the server costs. At the moment, its not really needed, but I would appreciate it regardless.

2
0
submitted 1 day ago by [email protected] to c/tennessee
3
6
submitted 1 week ago* (last edited 1 week ago) by freamon to c/issues

I just upvoted a comment in a community hosted on my site, and in the nginx log I can see:

ip.address - - [19/Feb/2024:14:33:31 +0000] "POST /inbox HTTP/1.1" 200 0 "-" "Lemmy/0.19.3; +https://endlesstalk.org"
ip.address - - [19/Feb/2024:14:33:43 +0000] "POST /inbox HTTP/1.1" 200 0 "-" "Lemmy/0.19.3; +https://endlesstalk.org"

Dumping out the activity, I can see:

... (single vote from account on another instance) ...                   
{
  "@context": [
    "https://join-lemmy.org/context.json",
    "https://www.w3.org/ns/activitystreams"
  ],
  "id": "https://endlesstalk.org/activities/like/f102d062-dfe9-4ece-96e8-310a09b249ba",
  "actor": "https://endlesstalk.org/u/freamon",
  "object": "https://sh.itjust.works/comment/9061222",
  "type": "Like",
  "audience": "https://lemmon.website/c/tails"
}
... (single vote from account on another instance) ...        
{
  "@context": [
    "https://join-lemmy.org/context.json",
    "https://www.w3.org/ns/activitystreams"
  ],
  "id": "https://endlesstalk.org/activities/like/f102d062-dfe9-4ece-96e8-310a09b249ba",
  "actor": "https://endlesstalk.org/u/freamon",
  "object": "https://sh.itjust.works/comment/9061222",
  "type": "Like",
  "audience": "https://lemmon.website/c/tails"
}
... (single vote from account on another instance) ...        

It's the same for comments too (if I grep the dump for other people's comments, there's only one, but there's two for comments made by me)

EDIT: can also see dupes from lemmy.ca (they actually sent the same Like 3 times).

4
1
submitted 2 weeks ago* (last edited 2 weeks ago) by lemmy to c/endlesstalkorg

The s3 host that pictrs use, have gone down.

I might have to move to another s3 host, which will mean it will take a bit before images are working. This will cause a loss of images for the last 2-3 hours before pictrs stopped working.

EDIT: Have moved to new s3 host. Unsure how many images were lost during the outage.

5
1
submitted 1 month ago* (last edited 1 month ago) by lemmy to c/endlesstalkorg

Local time can be seen here

0.19.3 is mostly bugfixes. See release notes here for more information.

There should be no downtime or very minimal downtime. If there are any issues, check the uptime site here or site status here

6
1
submitted 1 month ago* (last edited 1 month ago) by lemmy to c/endlesstalkorg

Local time can be seen here

0.19.2 contains fixes for outgoing federation and a few other things. See release notes here for more information.

There should be no downtime or very minimal downtime. If there are any issues, check the uptime site here or site status here

EDIT: The server went down / was very very slow to respond. I'm not quite sure why.

7
5
The update to 0.19 (self.endlesstalkorg)
submitted 2 months ago by lemmy to c/endlesstalkorg

The 0.19 version is out and I expect to update sometime during the next week. Since it is a big release, I will need to spend some more time testing, that everything still works fine and ensure that the migration works without problems as well.

I will update with another post, when I know, when the update will take place.

8
1
Cross posting (mostr.pub)

Cross posting

Cross posting from nostr to Lemmy

@0bd4b3c7

9
1
submitted 3 months ago* (last edited 3 months ago) by [email protected] to c/nerd

Ye ek ḅot simple guide hæ, meri script, yani "hinglish-lipi", ya ise iski hi lipi me "hiṇgliṣ-lipi", ke bare me :

Rules

+ agr koi alphabet normal diḳ rha hæ, ṯo use væse hi pronounce krna hæ jæse normal hinglish (whatsapp ḅaṣa) me krte hæ :
Example : k = क, p = प , m = म

+ ek vyṇjn ki pronounciation krne ke liye 2 alphabets ki koi zrụrṯ nhi hæ :
Example : नमकीन ≠ namakịn, नमकीन = nmkịn

+ agr koi alphabet alg diḳ rha hæ, yani alphabet ke nịẋe dot ho, to use væse hi Use kreṇge jæse normal hinglish (whatsapp ḅaṣa) me kisi alphabet ke ạge "h" lgakr pronounce krte hæ.
Example : खाना = ḳana , शांति = ṣaṇti
+ yhi same alphabet ke nịẋe dot swar ko bṛi mạt'ra me convert kr deta hæ :
Example : कौन = kꜷn , कीमा = kịma , इमली = imli , कैंची = kæṇẋi
Exception : ṛ = strong 'r' ; ẋ = च ; ẍ = छ

+ ट, त ko normal hinglish me "t" aur ठ, थ ko normal hinglish me "th" liḳṯe hæ, isi vjah se ट, त, ठ, थ ko t, ṭ, ṯ, ṱ liḳa jaṯa hæ respectively.

+ kuẍ hinglish ꜷr english ke words same diḳ skṯe hæ, jæse use aur use, iske liye jb mn kre english word ke phle - lga skṯe hæ
Example : use -use krna ṱa

+ अनुस्वार, चन्द्रबिन्दु lgana hæ ṯo ṇ ka -use krna, word ke last me lgana ho ṯo ẍoṛ ḅi skṯe hæ.

+ agar ị word ke end me ạ rhạ ṯo use i ya ị dono liḳ skte hæ, væse agr word ke bịẋ me ạ rhạ hæ to ḅi dono -use kr skṯe hæ lekin isse confusion ho skṯi h

+ same ạ ke liye ḅi hæ, bs ạ me confusion nhi hoṯi generally, to ạ ka -use bs words ki starting me krṯe hæ

+ hlṇṯ yani ạḓe vyṇjn ya ' ka -use krṯe hæ : Example : क्या = k'ya or kya

+ vyṇjn ke bad svr, jæse नई ko ni nhi likh skṯe isliye "n`ai" , agar नाई liḳna hoṯa ṯo "nai" liḳṯe hæ siḓa.

+ pronounciation ke vjh se spelling mistakes acceptable hæ, jæse बहुत ko "bhuṯ" ki jgh "ḅoṯ" liḳna, lekin isse confusion ho skṯi hæ !

v1.0

@nerd

10
1
Real Shitpost # 1 (infosec.exchange)
submitted 3 months ago by [email protected] to c/nerd

Real Shitpost # 1

Hinglish Plus Pro Script made out of unicode characters

Consonants

क 𑂍
ख ખ *
ग 𑂏
घ 𑂐
ङ ઙ *
च ʧ / 𑂓'
छ 𑂓
ज 𑂔
झ Ɉ / 𑂕
ञ 𑂖
ट 𑂗
ठ ઠ *
ड ડ
ढ 𑂛
ण 𑂢
त ત *
थ 𑂟
द ໔ * Lao digit
ध ຍ * Lao letter
न 𑂢
प 𑂣
फ ફ / ꜰ *
ब ദ * malyalam
भ 𑂦
म 𑂧
य ય *
र ર *
ल ന * malayalam
व વ *
श શ *
ष 𑂭
स 𑂮

  1. ह 𑂯ऩ 𑂢ऱ રक़ 𑂍'ख़ ખ'ग़ 𑂏'ज़ 𑂔'ड़ 𑂚ढ़ 𑂜फ़ ફ'य़ ય'क्ष ક્ષज्ञ જ્ઞ

@nerd

11
1
submitted 3 months ago* (last edited 3 months ago) by [email protected] to c/lemmy

Color Combo in Pair that are eye candy to me

Contrasting Red, Blue, Green, Yellow, Black as major and white or silver as minor

@lemmy

12
1
Welcome ! (tldr.nettime.org)
submitted 3 months ago* (last edited 3 months ago) by [email protected] to c/lemmy

Welcome !

This post is crossposted from Mastodon to Lemmy

@lemmy

13
3
submitted 5 months ago* (last edited 4 months ago) by lemmy to c/endlesstalkorg

The update fixes an issue with moderation actions sometimes not federating correctly(See release notes here).

There should be no or very minimal downtime. To convert UTC to your local time, use this

14
1
Hello! (self.tennessee)
submitted 5 months ago by ruh to c/tennessee

First post. More to come!

15
2
submitted 5 months ago* (last edited 5 months ago) by lemmy to c/endlesstalkorg

I expect a very minimal downtime of ca. 5-15 mins.

16
2
submitted 5 months ago by lemmy to c/endlesstalkorg

I had made some config changes to the database earlier in connection with the move to a new server, that caused the storage usage of the database to grow a lot. Then when it had no more space left, it crashed which caused the downtime. Unfortunately it happened at a time, where I wasn't available to fix immediately, which is why it was down for so long.

It is now fixed and I will keep a watch(setup an alert for database disk usage) to make sure it doesn't happen again.

17
1
submitted 5 months ago* (last edited 5 months ago) by lemmy to c/endlesstalkorg

Seems to be caused by low amount of available storage. This caused k8s to evict/delete pods -> site went down,, then it would fix itself -> site goes up again but then k8s would evict again -> site goes down. This continued untill it stabilized at some point.

This should be fixed and there should be more space available, when I move the server to a new host. I expect to move to a new server sometimes in the comming week. Will annonce the date, when I know, when it will happen.

EDIT: Spoke a little bit too soon, should be fixed now though.

EDIT2:

There was something that kept using storage, so ran into the issue again. Then the volume/storage for the image service(pictrs) stopped worked for some unknown reason(Thankfully, I have backups) and there shouldn't be any images lost.

Good news is that I have reclaimed a lot of storage, so shouldn't be in danger of running out of space for a long time.

18
3
Downtime from 23:32 - 23:56 (self.endlesstalkorg)
submitted 5 months ago by lemmy to c/endlesstalkorg

While preparing for migration to a new host, I had to setup the db, but during that I deleted a resource in k8s to force a reload of settings in the db. This caused the db to use a different volume and it took a bit before I could revert it back to using the old volume.

No data should have been lost. Let me know, if anything is missing.

19
4
submitted 5 months ago by lemmy to c/endlesstalkorg

Same thing as yesterday.

20
2
submitted 5 months ago by lemmy to c/endlesstalkorg

Unfortunatly the tool for scanning CSAM didn't detect the image, so to ensure there are no CSAM on the server, images for the last 8 hours has been deleted.

21
1
submitted 5 months ago by lemmy to c/endlesstalkorg

The filesystem manager(longhorn) I use reported that multiple volumes were faulted. This caused the site to go down.

I have no idea why the volumes faulted, only that a reboot of the server fixed it. Hopefully this was a strange one off and it doesn't occur again.

22
2
submitted 5 months ago by lemmy to c/endlesstalkorg

To make it easier to deferate from unwanted instances I have switched to using the fediseer. With this tool I can get censures from other trustworthy instances. A censure is a "completely subjective negative judgement"(see more here) and reasons for the censure can be listed.

Currently I'm using the censures from lemmy.dbzer0.com(Can be seen here), that has any of the following reasons for the censure

  • Lolicon
  • CSAM
  • Fascism
  • Hate speech
  • Bigotry
  • Pedophilia
  • Bestiality
  • MAP

I will still manually deferate from instances, when it is needed, but this makes easier to deferate bad instances I would have missed/didn't know about.

Note: The automated deferation also includes spam instances, which is currently defined by

  • More than 30 registered users per local post + comments
  • More than 500 registered users per active monthly user.
23
5
submitted 6 months ago by lemmy to c/endlesstalkorg

The main reason is that they allow/support pedophilia, but they also allow zoophilia and biastophilia. They try to label it as MAP(minor-attracted person), but it is still pedophilia. Example of MAP post here.

24
10
submitted 6 months ago* (last edited 6 months ago) by lemmy to c/endlesstalkorg

There have been a report of CSAM and unfortunately the lemmy-safety doesn't go through the images quickly enough(on my hardware) to be of use in this case.

I think there exists a tool to purge a image via information from a post, but wasn't unable to find it now. In the future I can hopefully use that tool, when reports of CSAM come in.

25
7
submitted 6 months ago by lemmy to c/endlesstalkorg

To ensure that there aren't any CSAM or other problematic images, I have setup db0's lemmy-safety tool. This will scan images and delete them, if there is a high chance that it is an illegal or unethical image.

Unfortunately, the tool isn't perfect, so sometimes perfectly fine images might be deleted after you have uploaded them. In that case you need to upload a different image, since a similar image will probably be flagged as well.

When the moderation tools for lemmy are better I can hopefully remove the scanning tool, but untill then I think this is the best option.

If anyone has an alternative/better idea, I would love to hear it.

view more: next ›

Endlesstalk

164 readers
8 users here now

guarantees

endorsements

Get started

See the Getting Started Guide from lemmy.world

Donations

If you would like to make a donation to support the cost of running this platform, please do so here

Questions / Issues

Questions/issues can be posted here or emailed to [email protected]. Reporting is to be done via the reporting button under a post/comment.

Status

Uptime week

Response time 1h

Site status and uptime monitoring are available.

Notes

There is a upload limit for images on 1 MB

Rules

Be respectful:

Treat other users with respect and kindness. Personal attacks, harassment, or any form of hate speech will not be tolerated.

Stay on topic:

Keep discussions relevant to the respective community or post. Avoid going off-topic or derailing conversations.

No spam or self-promotion:

Do not use Endlesstalk.org solely for self-promotion or excessive advertising. Promote your content or products in designated areas, such as the appropriate community or specific promotion threads.

No illegal content:

Do not post or share any content that is illegal, promotes illegal activities, or violates intellectual property rights. This includes sharing copyrighted material without permission.

Provide accurate information:

Share reliable and fact-checked information. Misinformation or deliberate spreading of false information is strongly discouraged.

No personal information:

Do not post personal information about yourself or others without consent. Respect privacy and confidentiality.

No trolling or flame wars:

Engage in constructive discussions and avoid trolling, flaming, or engaging in prolonged arguments that disrupt the community. Disagreements are allowed, but they should be handled respectfully.

Report violations:

If you come across any content or behavior that violates the rules or community guidelines, report it to the moderators or site administrators promptly.

Follow community guidelines:

Each community on Endlesstalk.org may have specific guidelines or rules. Familiarize yourself with these guidelines and adhere to them when participating in those communities.

Use appropriate language:

Refrain from using offensive or abusive language. Maintain a civil tone and communicate in a manner that promotes a positive and inclusive environment.

Be mindful of the voting system:

Use upvotes and downvotes to express your opinion on the quality and relevance of content. Do not engage in vote manipulation or brigading.___

founded 8 months ago
ADMINS