this post was submitted on 11 Dec 2023
17 points (100.0% liked)
Technology
37740 readers
562 users here now
A nice place to discuss rumors, happenings, innovations, and challenges in the technology sphere. We also welcome discussions on the intersections of technology and society. If it’s technological news or discussion of technology, it probably belongs here.
Remember the overriding ethos on Beehaw: Be(e) Nice. Each user you encounter here is a person, and should be treated with kindness (even if they’re wrong, or use a Linux distro you don’t like). Personal attacks will not be tolerated.
Subcommunities on Beehaw:
This community's icon was made by Aaron Schneider, under the CC-BY-NC-SA 4.0 license.
founded 2 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
This is the most likely answer. Leading vocals (and instruments) are normally centered, i.e. the same level on both channels, while background instruments are louder on one channel.
With the ground wire gone, you don't have a stereo signal left-ground / right-ground anymore, but a mono signal left-right, i.e. you only hear the difference between the two channels. That cancels out any centered vocals and instruments.
The volume will also likely be much lower, as the signal has to travel through twice the resistance (two speakers) at probably roughly the same voltage.
This actually used to be a nice trick to get a pseudo-instrumental version of any song - just subtract the channels from each other. You'll get a mono version of the song with only the background music. Not sure how it's done today, there's probably a better solution now.